Remove/install front door power window motor - AR72.29-P-1860T

MODEL 211.0/2/6

Shown on left front door with door foil removed

Fig 1: Identifying Front Door Power Window Motor Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/Install
1	Remove door foil from front door	Detach door foil to provide sufficient access to left front door power window motor (M10/3) or right front door power window motor (M10/4).	AR72.10-P-1010T
2	Remove tie straps (2).	Installation: Replace tie straps (2).
3	Remove bolts (3)		*BA72.29-P-1001-01A
4	Remove left front power window motor (M10/3) or right front power window motor (M10/4) from inner door panel with mounting wedge		*110589035900
5	Disconnect electrical connector (1) and remove left front power window motor (M10/3) or right front power window motor (M10/4)	Installation: Coat gears on left front power window motor (M10/3) or right front power window motor (M10/4) with Isoflex Topas L 32.
		Lock cylinder grease spray 50 ml	*BR00.45-Z-1012-06A
6	Install in the reverse order

ELECTRIC SYSTEM - SIDE DOORS

Number	Designation		Model 211
BA72.29-P-1001-01A	Bolt, motor of power window in front door	Nm	4.5

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1012-06A	Lock cylinder grease spray 50 ml	A 002 989 06 51