Remove/install drive for automatic load compartment cover - AR68.50-P-4950T

MODEL 211.2 

Fig 1: Identifying Automatic Load Compartment Cover Drive Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove headliner	Do not remove left side paneling in rear. Lay headliner down on front and rear seats together with connected wiring harnesses pointing away from the headliner in the area of the left C-pillar.	AR68.30-P-4300TD
2	Unscrew screw (1) from left and right load compartment cover drive (2)		*BA68.50-P-1001-04A
3	Remove left and right drive shaft (3) from body	Installation:  Replace tie straps.
4	Disconnect electrical connector (4)
5	Unscrew nuts (5) and remove load compartment cover motor (M50) together with drive shafts (3)
6	Install in the reverse order

LOAD COMPARTMENT COVER

Number	Designation		Model 211.2
BA68.50-P-1001-04A	Screw, load compartment cover drive to D-pillar	NM	6