LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2009 >> E350 Base >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Interior Equipment -- E350 (211.256) >> Basic Knowledge >> Tailgate control module, purpose - GF68.80-P-4002-02TA

Tailgate control module, purpose - GF68.80-P-4002-02TA

The purpose of the tailgate control module (N111)  is to actuate the tailgate functions and provide incoming information for further processing via the CAN interior compartment bus

Actuation of: 

Switching loads: 

IMPORTANT The trunk lid keyless go button (S62/21), loading floor switch (S150)  and tailgate closing system switch (S62/36)  are designed as buttons and have a "Toggle" function  , i.e. they differentiate between the "On" and "OFF" status based on the number of actuations  .

Reading in direct signals (depending on equipment): 

The rotary tumbler switch  and the lock pawl  are included in this locking unit. Their signals for the ATA are received and evaluated by the rear SAM control module with fuse and relay module (N10/2)  via a discrete line

Reading in signal via CAN interior compartment bus: 

Child safety switch without locking: 

ECE: 

USA: 

Interruption of power locking from passenger compartment (status locked or child safety lock) 

ECE: 

USA: 

IMPORTANT The child safety lock  for the tailgate is mechanical  and is not checked electrically