Rear interior lamp, task - GF82.20-P-4111-02T

The rear interior lamp (E15/3) has the following tasks:

• Control of the dome lamp (E15/3e3)
• Control of the left reading lamp (E15/3e1)
• Control of the right reading lamp (E15/3e2)
• Control of the light ring (E15/3e4) ambiance illumination, for Elegance, Avantgarde and Classic equipment with ATA

The following integral switches and buttons are read in:

• Left reading lamp switch (E15/3s1)
• Right reading lamp switch (E15/3s2)
• Dome lamp dimmer button (+) (E15/3s4)
• Dome lamp dimmer button (-) (E15/3s5)

The rear interior lamp (E15/3) with code (882b) interior monitoring (for ATA only) assumes other tasks too:

• Reading in of interior protection sensor (E15/3b2)
• Actuating of interior protection sensor motor (E15/3m1)

The rear interior lamp (E15/3) is switched on and off via the rear dome lamp switch (N70s2) in the overhead control panel control unit (N70).

In Model 211.6, depending on equipment and special body, the number and position of the interior lamps may vary.