LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2009 >> E350 Base >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> COMAND, Entertainment, Navigation, Phone & Tele Aid -- Basic Knowledge -- E350 (211.256) >> Basic Knowledge >> Video mode, function - GF82.85-P-2040TXB

Video mode, function - GF82.85-P-2040TXB

MODEL 211, 219 with CODE (512) COMAND APS with DVD changer with CODE (527) COMAND APS with single DVD drive (with navigation) except CODE (494) USA version except CODE (498) Japan version as of Model Year 09/AEJ 08 

MODEL 211, 219 with CODE (512) COMAND APS with DVD changer with CODE (528) COMAND with DVD changer with CODE (494) USA version as of Model Year 09/AEJ 08 

General information 

The Digital Versatile Disk (DVD) drive of the COMAND operating, display and controller unit (A40/3) supports the playback of video DVDs. Here, the video image is shown on the display on the COMAND operating, display and controller unit after the "VIDEO" menu and then the "DVD" submenu have been activated.

Operating instructions 

The system can be operated using the:

Function requirements 

Function sequence 

The picture signal are processed internally. The audio signals in vehicles with code 810 Sound system, are transferred via the Media Oriented System Transport (MOST) to the sound system amplifier (N40/3) where they are amplified and then processed to match the stored tone settings.

The amplified and processed audio signals are then output to the following speakers over discrete lines:

IMPORTANT The audio signal for the bass box speaker travels from the COMAND operating, display and controller unit via MOST to the amplifier for sound system and from there, via direct lines over the subwoofer amplifier (N40/9) and then to the bass box speaker.

IMPORTANT In vehicles except code 810 Sound system, the audio output takes place directly over direct lines via the COMAND operating, display and controller unit and through the following speakers:

IMPORTANT The DVD/CD video function is only available when the vehicle is stationary (up to 5 km/h). When the vehicle is moving on, audio playback remains active and - for safety reasons - a warning is shown on the display on the COMAND operating, display and controller unit.

COMAND operating, display and controller unit, component description   GF82.85-P-3134TXB 
Sound system amplifier, component description With code 810 Sound system GF82.62-P-6003TM
Subwoofer amplifier, component description With code 810 Sound system GF82.62-P-3050TM
Speaker system, component description Model 219 GF82.62-P-4220TXB
Model 211 GF82.62-P-4220TM