Installing and connecting sensors - AZ54.65-P-0001-03TT

Clip sensor holder (10) into ram strip (13).

Fig 1: Identifying Sensor Holder And Ram Strip
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Clip sensors (12) into sensor holder (10) so that the connecting coupling is inside pointing to the left side of the vehicle (arrow).

Fig 2: Clipping Sensors Into Sensor Holder
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Clip ram strip (13) onto bumper and connect bumper wiring harness (1) to sensors (12).
The connecting coupling with the grommet must be on the left-hand side of the bumper.

Fig 3: Identifying Ram Strip, Wiring Harness And Sensors
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Hook wiring harness (1) into the holders (arrows) provided on the bumper.

Fig 4: Locating Wiring Harness Holders
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.