Retrofit iPod interface - AZ82.60-P-0014TR

MODEL 211.0## 2# with CODE (526) COMAND (without navigation) except CODE (924) Bivalent natural gas drive except vehicles with FSE11, except vehicles with FSE12 

MODEL 211.0## 2# with CODE (527) COMAND APS (with navigation) except CODE (924) Bivalent natural gas drive except vehicles with FSE11, except vehicles with FSE12 

MODEL 211.0## 2# with CODE (528) HIGH Class USA except CODE (924) Bivalent natural gas drive except vehicles with FSE11, except vehicles with FSE12 

MODEL 211.0## 2# with CODE (530) COMAND APS USA (with navigation system) except CODE (924) Bivalent natural gas drive except vehicles with FSE11, except vehicles with FSE12 

Shown on model 211 up to model refinement 06/2006 

Fig 1: Identifying iPod, iPod Wiring Harness Plug And iPod Cradle

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove left side paneling in trunk	Vehicles without  code (287) Through-loading feature	AR68.30-P-4800T
		Vehicles with  code (287) Through-loading feature	AR68.30-P-4800TA
2	Remove SAM control unit with fuse and relay box from trunk and place to one side with electrical lines attached.	Vehicles without  code (809) Model year 2009 or up to  production date 1.6.08	AR54.21-P-1258T
		Vehicles with  code (809) Model year 2009 or as of  production date 2.6.08	AR54.21-P-1258TY
3	Remove side upholstery of left rear seat backrest
4	Release trim at left B-pillar in lower area until the cable duct is accessible		AR68.30-P-4700T
5	Remove left front floor covering		AR68.20-P-2050T
6	Remove COMAND operating, display and controller unit	Vehicles with  code (526) COMAND (without navigation) or with  code (527) COMAND APS (with navigation system) Vehicles with  code (528) HIGH Class USA or with  code (530) COMAND APS USA (with navigation)	AR82.85-P-1000T
	Install
7	Retrofit iPod interface wiring harness		AZ82.60-P-0001-01TRR
	Notes on avoiding damage to fiber optic cables during repair work	Media Oriented System Transport (MOST)	AH82.60-P-0001-05AK
8	Retrofit iPod wiring harness	Vehicles with  code (580) Air conditioning system or with USA Tempmatic or  vehicles with  code (581) Comfort automatic air conditioning as of 09.2004 Rechargeable drill/screwdriver gotis://G_58.0_01.1	AZ82.60-P-0001-02TR
		Vehicles with  code (581) Comfort automatic air conditioning up to 08.2004 Rechargeable drill/screwdriver gotis://G_58.0_01.1	AZ82.60-P-0001-02TTR
9	Retrofit iPod interface		AZ82.60-P-0001-03TXR
10	Glue iPod cradle (29) into glove compartment using universal adhesive	Can be stuck to sub-compartment or base of glove compartment.
		Universal adhesive	*BR00.45-Z-1003-02A
11	Connect iPod (1) to iPod wiring harness plug (23) in glove compartment
12	Insert iPod (1) into iPod cradle (29)
13	Install remaining parts onto vehicle
14	Carry out variant coding with the Diagnosis Assistance System	In vehicles without  one of the codes listed below: Code (380) Complete preinstallation for MB telephone "cell phone" Code (382) MB phone "cell phone" in armrest Code (386) Preinstallation for telephone "cell phone", UPCI [UHI] system Code (388) portable cellular telephone, UPCI system Code (389) Mobile phone preinstallation with universal interface, USA/Canada	AZ54.65-P-0001-08Q
15	Carry out function check	Check iPod functions as per iPod operating instructions in vehicle.