Remove/install paneling on rear center section - AR68.30-P-4785TA
WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 211.2
Shown on vehicle with code (943) Automatic extendable main loading floor
MODIFICATION NOTES
| 30.3.06 | "Remove/install side paneling in load compartment" added | Step 1 |
| Remove/install | |||
|---|---|---|---|
| 1 | Remove left side paneling in load compartment | AR68.30-P-1180T | |
| 2 | Open load compartment floor upwards | ||
| 3 | Unscrew screws (2) from rear center section paneling (1). | ||
| 4.1 | Unscrew mounting screws on loading floor lock (4). | On vehicles without code (943) Automatic extendable main loading floor | |
| 5 | Remove rear center section paneling (1) from retaining arrests toward rear | ||
| 6.1 | Remove locking eye flap (3) from rear center section paneling (1). | Only when replacing rear center section paneling (1) or locking eye flap (3). | |
| 7 | Install in the reverse order |