Intake manifold - BA09.20-P-1000-01R
Engine 156
MODIFICATION NOTES
| 6.8.09 | Value changed: Bolt, intake manifold to cylinder head |
| Value changed: Bolt, intake manifold to cylinder head | |
| Value changed: Bolt, intake manifold to cylinder head | |
| 6.8.09 | Value changed: Bolt, intake manifold to cylinder head |
| Value changed: Bolt, intake manifold to cylinder head | |
| Value changed: Bolt, intake manifold to cylinder head | |
| 6.8.09 | Value changed: Bolt, intake manifold to cylinder head |
| Value changed: Bolt, intake manifold to cylinder head | |
| Value changed: Bolt, intake manifold to cylinder head | |
| 6.8.09 | Value changed: Bolt, intake manifold to cylinder head |
| Value changed: Bolt, intake manifold to cylinder head | |
| Value changed: Bolt, intake manifold to cylinder head |
INTAKE MANIFOLD
| Number | Designation | Engine 156 | ||
|---|---|---|---|---|
| BA09.20-P-1001-01R | Bolt, pressure sensor/fuel to fuel distributor | Nm | 5 | |
| BA09.20-P-1002-01R | Bolt, intake manifold to cylinder head | Stage 1 | Nm | 10 |
| Stage 2 | ∠° | 90 | ||
| Stage 3 | ∠° | 10 | ||
| BA09.20-P-1003-01R | Bolt, reservoir to crankcase | M6 | Nm | 6.5 |
| M8 | Nm | 20 | ||
| BA09.20-P-1004-01R | Bolt, collector to intake manifold | Initial installation | Nm | 9 |
| Follow-up operations | Nm | 7 |