Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01SX
REAR AXLE SHAFT
| Number | Designation | Model 216 except model 216.379 | Model 216.379 | ||||
|---|---|---|---|---|---|---|---|
| BA35.30-P-1001-01I | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | M26 | Nm | 350 | - | |
| not self-locking | M26 | Stage 1 | Nm | 170 | - | ||
| Stage 2 | ∠° | 45 | - | ||||
| not self-locking | M29 | Stage 1 | Nm | - | 150 | ||
| Stage 2 | ∠° | - | 45 |
REAR AXLE SHAFT
| Number | Designation | Model 221 without code Z07/Z07+Z19 except model 221.179 | Model 221.179 | ||||
|---|---|---|---|---|---|---|---|
| BA35.30-P-1001-01I | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | M26 | Nm | 350 | - | |
| not self-locking | M26 | Stage 1 | Nm | 170 | - | ||
| Stage 2 | ∠° | 45 | - | ||||
| not self-locking | M29 | Stage 1 | Nm | - | 150 | ||
| Stage 2 | ∠° | - | 45 |
REAR AXLE SHAFT
| Number | Designation | Model 221 with code Z07/Z07+Z19 | ||||
|---|---|---|---|---|---|---|
| BA35.30-P-1001-01I | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | M26 | Nm | - | |
| not self-locking | M26 | Stage 1 | Nm | - | ||
| Stage 2 | ∠° | - | ||||
| not self-locking | M29 | Stage 1 | Nm | 390 | ||
| Stage 2 | ∠° | - |
Detaching
- Apply parking brake
- Unscrew twelve-point collar nut (12).
The twelve-point collar nut (12) should be replaced each time it is unscrewed.
Socket for twelve-point collar nut M29
If a self-locking collar nut is mounted, the thread of the rear axle shaft is to be cleaned. Use suitable brush to remove residue of thread locking compound (arrow).
Courtesy of MERCEDES-BENZ USA
Mount on and secure
Only for thread M26: note twelve-point collar nut (12) variant. The non self-locking variant is replaced by the self-locking variant.
- Tighten twelve-point collar nut (12)
.
- Secure twelve-point collar nut (12) with caulker so that no gap remains between the groove and locking collar of the twelve-point collar nut.
Double lock twelve-point collar nut (arrows), for non self-locking variant. Lock twelve-point collar nut one time only, for self-locking variant.
- Release parking brake.