Remove/install pull cable for Engine hood - AR88.40-P-3100SC

MODEL 216 

Engine hood cable front section 

Fig 1: Identifying Engine Hood Pull Cable Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unscrew bolts (1) and unclip radiator grille (2) with suitable tool (arrows).
2	Remove Engine hood catch lower section (9)		AR88.40-P-3200SX
3	Disconnect weather-stripping (7) in area of radiator crossmember (6)
4	Open splitter (4) and unhook Engine hood cable rear section (3)
5	Unscrew bolts (8, 12) and lift radiator crossmember (6).	Installation:  Ensure that left and right bracket (10) is seated correctly in radiator.
6	Unclip Engine hood cable front section (5) on bottom side of radiator crossmember (6) from clips (11) and remove.
7	Install in the reverse order