Online SCN coding - AR54.21-P-0013-01X

The following work instructions describe the procedure for the online software calibration number (SCN) coding with Xentry Flash.

Precondition for SCN coding:

• Networked STAR DIAGNOSIS diagnostic system
• User ID and password for Xentry flash (user on aftersales platform)

Entry into coding in the Diagnosis Assistance System (DAS) 

1. Select control unit.
2. Select menu item "control unit adaptations" or "initial startup". Continue with "F3".
3. Select menu item "SCN coding". Continue with "F3".
4. Select "Online (networked STAR DIAGNOSIS device)" menu item. Continue with "F3".
5. Enter user ID and password into the login screen. Continue with "Log in".

   After logging in the SCN coding data are automatically queried in the background and the control unit is then coded.

6. Press "F11" to print out the order log and enclose the repair order.

   The order record can also be stored in the Diagnosis Assistance system (DAS). This is done by clicking on "F11", "Print to file", selecting "printout of test step" and entering a file name. In StarUtilities, the StarPad program can be used to display and printout the order log at the "Logs" menu item.

7. Continue with "F2".

   The SCN coding of the control unit is complete