LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2009 >> CL550 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission -- Basic Knowledge -- Cl550 -- 216 Chassis >> Basic Knowledge >> Automatic transmission (AT), gear selector switch positions - GF27.10-P-0001-18SX

Automatic transmission (AT), gear selector switch positions - GF27.10-P-0001-18SX

Transmission 722.9 in model 216.371, 221.022/028/054/056/070/071/080/084/086/122/128/154/156/170/171/180/184/186 except code (494) USA version 

Transmission 722.9 in model 216.377, 221.077/177 

Shows model 221.022 

Fig 1: Identifying Positions Of Direct Select Gear Selector Switch
G07637218Courtesy of MERCEDES-BENZ USA

The gear selector switch DIRECT SELECT can be moved to 4 different positions. It is possible to select between 3 transmission modes using the transmission mode button (A40/9s8) (model 216) or the transmission mode switch (S16/5) (model 221).

The gear selector switch positions refer to:

P Park lock and start position

R Reverse gear

N Neutral and start position (No power transmission takes place. The vehicle is free to move)

D All 7 forward gears are available.

Transmission modes button (model 216) or transmission modes switch (model 221) 

Sport program "S":

Comfort program "C":

IMPORTANT If kickdown is actuated the gears are shifted up and down as for the sport program "S".

Manual program "M":

Shift range limitation (on model 216.371, model 221 except model 221.077/177) 

When the sport program "S" or comfort program "C" is activated, in gear selector switch position "D" the shift range can be limited via the left steering wheel gear shifter and right steering wheel gear shifter.

Shift range limitation (on model 216.377, model 221.077/177) 

In gear selector switch position "D", when the sport program "S" or comfort program "C" is activated, the shift range can be limited via the steering wheel gear shifter MINUS and steering wheel gear shifter PLUS.

IMPORTANT In the limited shifting range an upshift is authorized close to the engine limit speed.