Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01SX
REAR AXLE SHAFT
| Number | Designation | Model 216 except model 216.379 | Model 216.379 | ||||
|---|---|---|---|---|---|---|---|
| BA35.30-P-1001-01I | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | M26 | Nm | 350 | - | |
| not self-locking | M26 | Stage 1 | Nm | 170 | - | ||
| Stage 2 | ∠° | 45 | - | ||||
| not self-locking | M29 | Stage 1 | Nm | - | 150 | ||
| Stage 2 | ∠° | - | 45 | ||||
REAR AXLE SHAFT
| Number | Designation | Model 221 without code Z07/Z07+Z19 except model 221.179 | Model 221.179 | ||||
|---|---|---|---|---|---|---|---|
| BA35.30-P-1001-01I | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | M26 | Nm | 350 | - | |
| not self-locking | M26 | Stage 1 | Nm | 170 | - | ||
| Stage 2 | ∠° | 45 | - | ||||
| not self-locking | M29 | Stage 1 | Nm | - | 150 | ||
| Stage 2 | ∠° | - | 45 | ||||
REAR AXLE SHAFT
| Number | Designation | Model 221 with code Z07/ Z07+Z19 | ||||
|---|---|---|---|---|---|---|
| BA35.30-P-1001-01I | Collar nut, rear axle shaft to rear axle shaft flange | self-locking | M26 | Nm | - | |
| not self-locking | M26 | Stage 1 | Nm | - | ||
| Stage 2 | ∠° | - | ||||
| not self-locking | M29 | Stage 1 | Nm | 390 | ||
| Stage 2 | ∠° | - | ||||
Detaching
- Apply parking brake
- Unscrew twelve-point collar nut (12).
The twelve-point collar nut (12) should be replaced each time it is unscrewed.
Socket for twelve-point collar nut M29
If a self-locking collar nut is mounted, the thread of the rear axle shaft is to be cleaned.
Use suitable brush to remove residue of thread locking compound (arrow).
Mount on and secure
Only for thread M26: note twelve-point collar nut (12) variant. The non self-locking variant is replaced by the self-locking variant.
- Tighten twelve-point collar nut (12)
.
- Secure twelve-point collar nut (12) with caulker so that no gap remains between the groove and locking collar of the twelve-point collar nut.
Double lock twelve-point collar nut (arrows), for non self-locking variant. Lock twelve-point collar nut one time only, for self-locking variant.
- Release parking brake.