Check brake lining thickness - AP42.10-P-4253A
MODEL 126, 164, 169, 171, 172, 201, 204, 207, 209, 211, 212, 216, 218, 219, 221, 230, 240, 245, 251
| Checking | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| 1 | Check lining thickness (1) of brake pads | With model 164, 169, 172, 204, 207, 209, 212 216, 218, 221, 230, 245, 251 except model 216.374 /377 /379, 221.074 /077 /174 /177 /179: |
|
| Measure thickness of brake pads. ↓ | AP42.10-P-4253-01GZ | ||
| Fig 4 | |||
| 2 | Remove stop plugs from check bores and check lining thickness (1) of brake shoes | ||
| 3 | Install stop plugs for check bores | ||
| 4 | Determine estimated remaining service distance of brake linings and agree on immediate or later replacement of brake pads/shoes with customer | AP42.10-P-4253-02A | |
| Replace brake pads or brake shoes | Front axle brake pads: |
||
| 5 | Remove/install brake pad on floating brake caliper | Model 216, 221 | AR42.10-P-0160SX |
| Remove/install brake pads on fixed caliper | Model 216, 221 Replace brake pads: |
AR42.10-P-0161SX | |