TV antenna selector component description - GF82.62-P-3006SXJ
MODEL 216.3, 221.0 /1 with CODE (498) Japan version up to Model Year 8
Illustrated on model 221
Location
The TV antenna selector is installed behind the C-pillar in the left side of the trunk.
Task
Antenna signals TV1 to TV4 are picked up, amplified and relayed to the TV antenna selector by the rear window antenna amplifier module (A2/12). The best TV signal is relayed to the COMAND controller unit (A40/3) from here. The TV antenna selector is switched via 2 inputs by switching voltages from the COMAND controller unit.