Remove/install supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116CW
MODEL 204, 207
| Remove/install | |||
|---|---|---|---|
| While working on the rear axle care must be taken to ensure that the surface of all aluminum components do not get any scratches, cracks and notches. Otherwise the service life of the parts will be affected | |||
| 1 | Remove spring control arm | AR35.20-P-0114CW | |
| 2 | Remove supporting ball joint from wheel carrier | AR35.20-P-0116-01CW | |
| Fig 1 | |||
| Fig 2 | |||
| Lubricant paste | *BR00.45-Z-1002-06A | ||
| 3 | Install in the reverse order |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1002-06A | Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00 | A 000 989 01 60 |