Remove/install rear seat backrest side bolster (MODEL 204.3 except CODE (P98) Black Series) - AR91.12-P-1710EC
MODEL 204.3 except CODE (P98) Black Series
MODEL 204.3 with CODE (224) Design individual seats in rear
MODEL 207.3
Remove rear seat cushion (2). See AR91.12-P-1020EC .
Remove bolt (6).
Pull seat belt (3) to one side.
Lift side bolster (1) on retaining bracket (4) upwards from holder (5) and remove side bolster (1).
Install in the reverse order.