210 589 00 43 96 Repair spindle, short - WS33.00-P-0057-06C

WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

FG33/Set C

MODEL 210

Use:

Replacement part for extraction tool

W 210 589 00 43 00.

Consisting of:

Hexagon nut 14 spindle, short (Tr 14 X3) (250 mm), collar nut

NOTE: Early versions of special tool W 210 589 00 43 00 were supplied with axial roller bearings, these were later replaced by brass disks. These brass washers belong here, in contrast to the replacement part
W 210 589 00 43 98
W 210 589 00 43 94 and W 210 589 00 43 95, for scope of supply

Fig 1: Identifying Repair Spindle, Short (210 589 00 43 96)

Courtesy of MERCEDES-BENZ USA