210 589 00 43 95 Repair spindle, long - WS33.00-P-0057-05C
WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
FG33/Set C
MODEL 210
Use:
Replacement part for extraction tool
W 210 589 00 43 00.
Consisting of:
Hexagon nut 16, Spindle, long (Tr 16 X3) (458 mm) collar nut
NOTE:
This repair kit is for tools with axial roller bearing (early version).
If the axial roller bearings are worn, the tool
W 210 589 00 43 00 is to be replaced in its entirety.
The repair kit W 210 589 00 43 99 W 210 589 00 43 96
W 210 589 00 43 97 should be used on tools with brass washers (new version).
If the axial roller bearings are worn, the tool
W 210 589 00 43 00 is to be replaced in its entirety.
The repair kit W 210 589 00 43 99 W 210 589 00 43 96
W 210 589 00 43 97 should be used on tools with brass washers (new version).