164 589 02 43 00 Extraction/insertion tool - WS33.00-P-0173B

WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

FG 33/35/Set B

MODEL 164.1 /8, 166, 251.0 /1, 171, 203, 204, 209

Separate part	164 589 02 43 01 Spindle	FG33/35/Set B	WS33.00-P-0173-01B
Separate part	164 589 02 43 02 Spindle	FG33/35/Set B	WS33.00-P-0173-02B
Separate part	164 589 02 43 03 Spindle	FG33/35 Set B	WS33.00-P-0173-03B
Separate part	164 589 02 43 99 Supplementary set	FG33/Set B	WS33.00-P-0173-04B

Use:

Extraction/insertion tool for rubber mount of front and rear axle differential and rear axle carrier. (In the case of special tool with manufacture date 02.05

W 164 589 02 43 99 extra must be ordered, is supplied complete as of manufacture date 08.05)

NOTE: Only to be used in conjunction with hand pump 652 589 00 33 21, hollow cylinder 652 589 00 33 22 and hydraulic hose
652 589 00 33 23.

Fig 1: Identifying Extraction/Insertion Tool (164 589 02 43 00)

Courtesy of MERCEDES-BENZ USA