171 589 00 39 00 Rivet milling cutter - WS91.00-P-0037B

WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

FG 91/72/Set B

MODEL 169.0 /3, 171.4, 197, 204, 212, 218, 221, 245

Separate part

171 589 00 39 01 Milling cutter crown

FG91/72/Set B

WS91.00-P-0037-01B

Use:

The rivet milling cutter is used to cut off the rivet head for the sidebag in the R171 seat and for the door modules.

NOTE: Only in conjunction with a commercially available cordless drill/driver.

Fig 1: Identifying Milling Cutter Crown (171 589 00 39 00)

Courtesy of MERCEDES-BENZ USA