Update map data status for COMAND navigation system - AP82.85-P-8252A
WARNING: This page is about a different car, the 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463
| Prepare update | |||
|---|---|---|---|
| 1 | Check whether a map data update is available to the customer free of charge | * Map update ↓ Service Information: Free map updates for COMAND |
SI82.85-P-0019A |
| 2 | Activation code for map data update available in Vehicle Documentation (VeDoc) | * not for USA ↓ Service Information: Order of card activation code for navigation units with hard disk navigation MODEL 463 with CODE XZ2 (Model year 2013) * not for USA ↓ Service information: Copy protection in navigation unit with hard-disk navigation COMAND with copy protection |
SI82.85-P-0020A SI82.85-P-0018A |
| 3 | Check state of charge (SOC) of the high- voltage battery | MODEL 212.095/098/195/298 * not for USA ↓ Service Information: Programming of control units |
SI54.21-P-0008B |
| 4 | Open engine hood | MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463 MODEL 204.3, 207, 212 MODEL 204.3, 207, 212 with CODE U60 (Pedestrian protection) Moving the engine hood to the vertical position: Detach left and right clamping levers at the upper left and right hinges. |
AR88.40-P-1000EW |
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 5 | Connect battery charger | Only switch on the charger after it has been connected! | |
| Notes on battery | AH54.10-P-0001-01A | ||
| Notes on AGM battery | AH54.10-P-0002-01A | ||
| 6 | Switch ignition lock to position "1" (circuit 15R) | ||
| 7 | Switch on COMAND controller unit | ||
| 8 | Remove CDs or DVDs from the COMAND disc drive | When updating using the master DVD | |
| 9 | Connect the Blu-ray player of the diagnostic system to the front USB connection ports of the COMAND control unit | When updating using the master Blu-ray disc Alternatively, connect the master USB stick to the front USB connections of the COMAND control unit. The option to update using Blu-ray is not available in every market. If no Blu-ray option is available: ↓ Carry out update using the master DVD or USB stick. |
|
| Update | |||
| 10.1 | Insert the master DVD and update map data | MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463 When updating using the master DVD Enter the activation code provided in VeDoc and start with the update. Any error messages that may be displayed should be ignored. The update process can take a while to complete. The progress bar indicates how much has been completed. If there are multiple master DVDs, follow the instructions on the COMAND display. |
|
| 10.2 | Insert master Blu-ray disc into the external Blu-ray player of the XENTRY kit and update map data | MODEL 205, 222 with CODE 531 (COMAND Online) When updating using the master Blu-ray disc (for NTG 5.0) Enter the activation code provided in VeDoc and start with the update. The progress bar indicates how much has been completed. The update version can subsequently be called up via "Navi", "Options" and "Map version". |
|
| 10.3 | Start the menu from the master USB stick and update the map data | MODEL 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246, 463 When updating using the master USB stick (from NTG 4.5 onwards) Enter the activation code provided in VeDoc and start with the update. The update process can take a while to complete. The progress bar indicates how much has been completed. |
|
| 11.1 | Remove all master DVDs from the vehicle and insert the previously removed CDs or DVDs | MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463 After updating using the master DVD |
|
| 11.2 | Remove the master Blu-ray disc from the Blu- ray player and disconnect the front USB connectors | MODEL 205, 222 After updating using the master Blu-ray disc (for NTG 5.0) |
|
| 11.3 | Remove USB stick from the front USB connections | MODEL 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246, 463 After updating using the master USB stick (from NTG 4.5 onwards) |
|
| 12 | Switch off COMAND control unit | ||
| 13 | Switch off ignition | ||
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 14 | Disconnect battery charger | Switch off charger before disconnecting! | |
| Notes on battery | AH54.10-P-0001-01A | ||
| Notes on AGM battery | AH54.10-P-0002-01A | ||
| 15 | Close engine hood | MODEL 117, 156, 164, 166, 171, 172, 176, 204, 205, 207, 212, 216, 218, 221, 222, 230, 231, 242, 246, 251, 463 MODEL 204.3, 207, 212 MODEL 204.3, 207, 212 with CODE U60 (Pedestrian protection) Close engine hood: Mount left and right clamping levers at the upper left and right hinges. |
AR88.40-P-1000EW |