Route wiring harness and connect - AZ54.65-P-0001-06CWW

Fig 1: Identifying Control Unit Output, Control Unit Input And LVDS Display Wiring Harness

Courtesy of MERCEDES-BENZ USA

1. Route wiring harness of Head unit Low Voltage Differential Signal (LVDS) (10a) and wiring harness of LVDS display (10b) in the radio recess to the front passenger footwell. Contact connector on vehicle's own wiring harness (21) with the coupling of the vehicle's own wiring harness.
2. Fix the wiring harness of the head unit LVDS (10a) and wiring harness of the LVDS display (10b) in a space-saving manner in the radio recess.

Do not damage the wiring harness of the LVDS head unit (10a) and wiring harness of LVDS display (10b) by crushing or trapping.

Pay attention to adequate length for coupling on radio (22). The coupling (22) of the wiring harness of LVDS head unit (10a) are contacted with the control unit later on.

Fig 2: Identifying Radio Coupling And Wiring Harness

Courtesy of MERCEDES-BENZ USA