Remove/install mirror glass - AR88.70-P-9020CW

MODEL 164, 251 as of model year 2011 

MODEL 203.7## #E with CODE (809) Model year 2009 

MODEL 204, 207, 212, 218 

Shown on model 204 with code (249) Automatically dimming inside and outside mirror including folding outside mirror 

Fig 1: Identifying Mirror Glass Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
Danger!	Risk of injury  Skin, eye and respiratory system irritation may occur through contact or inhalation of substances contained in the mirror lens	Wear protective gloves and safety glasses.	AS60.00-Z-0008-01R
1	Tilt out mirror lens (1) upward
2	Manually pull mirror glass (1) toward rear and unclip left outside mirror (M21/1) and right outside mirror (M21/2)	When unclipping, ensure that mirror glass (1) and the catch hooks (2) are not damaged, otherwise the mirror glass (1) must be replaced. Installation  : Clip mirror glass (1) from bottom upward into left outside mirror (M21/1) or right outside mirror (M21/2). Ensure that all catch hooks (2) arrest properly.
3	Disconnect electrical connectors (3, 4) and remove mirror glass (1)	The number of electrical connectors (3, 4) depends on the vehicle equipment. Ensure that the electrical wiring harnesses are installed without pinching to prevent damage.
4	Install in the reverse order