Adjusting headlamps when driving abroad - AH82.10-P-0001-01A

Model 164, 169, 171, 172, 203, 204.0/2/9, 207, 209, 211, 212, 215, 216, 218, 219, 220, 221, 230, 245, 251 

Headlamp with projection system (with halogen, xenon or full LED headlamps) 

The headlamp conversion is generally mechanical.

Pressing a lever changes the position of a movable covering. The movable covering then covers up the part of the light beam which - through corresponding projection - is responsible for illuminating the edge of the roadway.

The lever for this purpose is located next to the bulb and can be accessed after removing the corresponding cover on the headlamp housing.

The lever's location, version and actuation are dependent on the manufacturer of the headlamp and the model.

Observe the safety regulations pertaining to handling high-voltage parts on xenon and bi-xenon headlamps.

The setting must be checked after the adjustment using a headlamp aimer.

With model 211  with code (621) Intelligent Light System (left-hand traffic) or code (622) Intelligent Light System (right-hand traffic), the headlamps are adjusted electronically using Star Diagnosis.

On model 216,  the headlamps are adjusted electronically using Star Diagnosis.

In model 172 and 204.9  with halogen headlamps, the headlamps are adjusted using the headlamp range control.

The headlamp setting must be checked before adjustment using a headlamp aimer.

In model 207 and model 212  up to 30.11.09 (YoM 09/2) with bi-xenon headlamps, the headlamps are adjusted electronically using Star Diagnosis.

In model 172, 207 and model 212  as of 1.12.09 (YoM 09/2) with bi-xenon headlamps, the headlamps are adjusted in the onboard computer via the instrument cluster.

In model 218  with bi-xenon and full LED headlamps, the headlamps are adjusted on the onboard computer using the instrument cluster.

Changing the light beam after adjusting the movable cover (2) (view from behind through the lamp aperture (3).

The overview shows the status for right-hand traffic.

Model 164 with halogen headlamps 

Model 164 with xenon headlamps 

Model 169 with halogen headlamps 

Model 169 with xenon headlamps 

Model 171 with halogen headlamps 

Model 171 with xenon headlamps 

Model 172 with halogen headlamps 

The headlamps are adjusted using the headlamp range controllers.

Procedure:

• With a normal load, turn the headlamp range controller to position 1.

  Turn headlamp range control to position 0 after returning to the country in which the car is registered.

• With a high load, turn the headlamp range controller to position 2.

  After unloading the vehicle, turn the headlamp range controller back to position 1.

Model 172 with bi-xenon headlamps 

On vehicles with Intelligent Light System, the headlamps are adjusted in the onboard computer via the instrument cluster.

Model 203.0/2 with xenon headlamps, 

Model 203.7## #A with xenon headlamps, 

Model 203.7## #E up to 035817 with xenon headlamps 

Model 204.0/2 with halogen headlamps, Model 203.7## #E with code (809) Model year 2009 with halogen headlamps 

Model 204.0/2/9 with bi-xenon headlamps, model 203.7## #E with code (809) Model year 2009 with bi-xenon headlamps 

Model 204.9 with halogen headlamps 

The headlamps are adjusted using the headlamp range controllers.

Procedure:

• With a normal load, turn the headlamp range controller to position 1.

  Turn headlamp range control to position 0 after returning to the country in which the car is registered.

• With a high load, turn the headlamp range controller to position 2.

  After unloading the vehicle, turn the headlamp range controller back to position 1.

Model 209 with bi-xenon headlamps 

Model 209 with bi-xenon headlamps with integrated curve illumination 

Model 211 with halogen headlamps 

Only one of the two levers (7) must be adjusted. The other lever (7) moves automatically in parallel.

Model 211 with bi-xenon headlamps 

Model 211 with code (621) Intelligent Light System (left-hand traffic) or code (622) Intelligent Light System (right-hand traffic) 

Procedure:

• Menu item "Control units"
• Menu item "Design"
• Menu item "Left xenon headlamp control unit"
• "Control unit adaptations" menu item

The headlamps are not adjusted manually. The headlamps are adjusted using STAR DIAGNOSIS.

Model 207, 212 with halogen headlamps 

Model 207 and model 212 with bi-xenon headlamps up to 30.11.09 (YoM 09/2) 

The headlamp conversion is done with the aid of the STAR DIAGNOSIS.

Procedure:

• Menu item "Control units"
• Menu item "Design"
• Menu item "Left xenon headlamp control unit"
• "Control unit adaptations" menu item

Model 207 and model 212 with bi-xenon headlamps as of 1.12.09 (YoM 09/2) 

On vehicles with Intelligent Light System, the headlamps are adjusted in the onboard computer via the instrument cluster.

Model 216 

The headlamps are not adjusted manually. The headlamps are adjusted using STAR DIAGNOSIS.

Procedure:

• Menu item "Control units"
• Menu item "Design"
• Menu item "Left xenon headlamp control unit"
• "Control unit adaptations" menu item

Model 218 

In vehicles with bi-xenon and full LED headlamps, the headlamps are adjusted on the onboard computer using the instrument cluster.

Model 219 with halogen headlamps 

Model 219 with xenon headlamps 

Model 215 with xenon headlamp (top picture) 

Model 220 with xenon headlamp (bottom picture) 

Model 220 with halogen headlamps 

Model 221 with halogen headlamps 

Model 221 with xenon headlamps 

Model 230 

Shown on vehicle up to 28.1.08 

Model 245 with halogen headlamps 

Model 245 with xenon headlamps 

Model 251 with halogen headlamps 

Model 251 with xenon headlamps