Remove/install contact plate for cell phone holder (UPCI [UHI]) in the armrest - AR82.70-P-8919EC
MODEL 204.0 /2 /3, 207 with CODE (386) Comfort telephony
MODEL 212 with CODE (386) Comfort telephony except CODE (279) Electronic gear selector
Fig 1: Identifying Center Console, Contact Plate, Bluetooth Module And Mobile Phone Electrical Connector
Illustrated on model 207.3
| Remove/install | |||
| 1.1 | Remove rear stowage compartment on center console (1) | Vehicles without code (301) Ashtray package/smoker package | |
| 1.2 | Remove rear ashtray from center console (1) and place to one side with connected electrical lines | Vehicles with code (301) Ashtray package/smoker package | |
| Model 204, 207 | AR68.20-P-2230CW | ||
| Model 212 | AR68.20-P-2230EW | ||
| 2 | Slide back foam rubber jacketing and disconnect mobile phone electrical connector (X39/37) | ||
| 3 | Unclip contact plate (2) using assembly wedge (3) from center console (1) | Fig 2 | |
| 4 | Pull contact plate (2) with Bluetooth module (A34/7) upwards and out of the center console (1) | ||
| 5 | Unclip cover (5) from contact plate (2) and swivel to one side | ||
| 6 | Remove bolt (6) | ||
| 7 | Remove center console (1) | Model 204, 207 | AR68.20-P-2000CW |
| Model 212 | AR68.20-P-2000EW | ||
| 8.1 | Remove bolt on underside of center console (1) and route Bluetooth module (A34/7) with electrical wiring harness (4) out of contact plate (2) | On model 204.0/2 as of model year 2012 / YoM 11 and model 204.3 | AR68.20-P-2150CW |
| 8.2 | Expose electrical wiring harness (4) for Bluetooth module (A34/7) on the contact plate (2) (arrows) and route Bluetooth module (A34/7) with electrical wiring harness (4) out of the contact plate (2) | ||
| 9 | Install in the reverse order |