Set low beam - AP82.10-P-8260-01A
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
- When setting the height the light-dark boundary must have the same coverage as the horizontal broken line (4) of the device. When lateral adjustment is taking place, the bent line (5) must lie below the central mark (6) and start at the horizontal division mark (4).