Remove/install steering column module - AR54.25-P-2802PQ
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 203 as of 24.4.04, 209 as of 1.6.04
Shown on model 203
Fig 1: Identifying Steering Column Module Remove/Install Components - Model 203 As Of 24.4.04, 209 As Of 1.6.04
MODIFICATION NOTES
| 24.5.06 | "Disconnect/connect ground line on battery" removed |
| Remove/install | |||
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | Model 169, 171, 199, 203, 209, 211, 215, 219, 220, 230, 240 Model 463.243/244/245/246/247/248/249/250/254/270/271/309/322/323/ 332/333 |
AH91.00-P-0002-01M | |
| 1 | Remove transmitter key from electronic ignition switch control unit | ||
| 2 | Remove steering wheel | AR46.10-P-0100P | |
| 3 | Do not twist fanfare horns and airbag clock spring contact (A45) | ||
| 4 | Unscrew bolt (1) fully | ||
| 5 | Detach steering column module (N80) | ||
| 6 | Install in the reverse order |