LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> SLK55 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Overall Vehicle - 171 Chassis >> Maintenance >> Read out workshop code/service code - AP00.20-P-0000 >> Read out service scope - AP00.20-P-0000-14V

Read out service scope - AP00.20-P-0000-14V

  1. Turn key in electronic ignition switch control unit to position 1.
  2. Press the system selection button (S110s3) repeatedly until the kilometer reading is displayed in the upper multifunction display (A1p13).
  3. Briefly press trip odometer reset button (A1s3) 3 times.

    IMPORTANT An acoustic signal is sounded and the voltage is shown in the multifunction display (A1p13).

  4. Press lower scroll forward/back button (S110s1)

    IMPORTANT The upper multifunction display (A1p13) shows the "Service menu".

    Shown on model 171 

    Fig 1: Identifying Multifunction Display, System Selection Button And Forward/Back Button
    G05026821Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  5. Press the + and - buttons, adjustment of specific functions and volume control (S111s1) repeatedly until "POSITIONS" is highlighted.
  6. Confirm selection with lower system selection button (S110s3).
  7. Read off and note service items to be performed.
  8. Press lower + and - buttons, adjustment of specific functions and volume control (S111s1) repeatedly to display and note down all the service items to be performed.
  9. Press the upper system selection button (S110s3) repeatedly until the kilometer reading is displayed in the upper multifunction display (A1p13).
  10. Turn key in electronic ignition switch control unit to position 0
scientia non olet · About LEMON Manuals