Remove/install tubular frame "locked" limit switch - AR77.39-P-3721V

MODEL 171.4 

Fig 1: Identifying Tubular Frame Locked Limit Switch Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Remove paneling from rear end center assembly		AR68.30-P-4785V
2	Remove tubular frame cover (1)		*BA64.20-P-1002-01A
3	Unscrew bolt (2)
4	Disconnect electrical connector (3) and remove tubular frame "locked" limit switch (S118) from trunk
5	Install in the reverse order

REAR END

Number	Designation		Model 171
BA64.20-P-1002-01A	Bolt, tubular frame cover to rear center assembly	Nm	7