Remove/install inner fender in rear fender - AR88.10-P-1400V
MODEL 171.4
Illustrated on right side of vehicle.
| Remove/Install | |||
|---|---|---|---|
| 1 | Raise vehicle with lifting platform | AR00.60-P-1000V | |
| 2 | Unscrew bolts (2) and remove splash guard (3) | ||
| 3 | Unclip cover (4) from inner fender (1) and remove | ||
| 4 | Remove expanding clips (5) | ||
| 5 | Unscrew nuts (6) | ||
| 6 | Remove screw (7) | ||
| 7 | Remove inner fender (1) from rear fender starting at rear toward front and from outside toward inside with mounting wedge | Figure | |
| 8 | Remove inner fender (1) | ||
| 9 | Install in the reverse order |