Disconnect/connect battery ground line - AR54.10-P-0003V
MODEL 171.4
| Disconnect, connect | |||
|---|---|---|---|
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | - | |
| 1 | Remove transmitter key from electronic ignition switch control unit and ensure that all consumers are switched off | ||
| 2 | Open engine hood and move to vertical position | AR88.40-P-1000V | |
| 3 | Open quick-release fittings (1) and remove air duct (2) | ||
| 4 | Loosen nut (3) and remove ground line (4) from negative terminal (5) of the battery (G1) | ||
| 5 | Connect in the reverse order. | ||
| 6 | Perform basic programming | AR00.19-P-0200V |