Remove/install trunk lid paneling - AR68.30-P-8150V

MODEL 171.4 

Fig 1: Identifying Trunk Lid Paneling, Expanding Clip And Trunk Lid

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Open trunk lid (3)
2	Open luggage cover	See Operating Instructions
3	Remove expanding clips (2)	Installation:  Replace damaged expanding clips (2).
4	Slide trunk lid paneling (1) toward front and remove from trunk lid (3)	Installation:  Position trunk lid paneling (1) at installation location, press upward in area of catch hook (arrows) and slide toward rear. Ensure that catch hooks (arrows) are seated properly in trunk lid (3)
5	Install in the reverse order