Detaching and attaching torsion bar connecting rod on rear axle - AR32.30-P-0630-01P
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
| Number | Designation | Model 203 | Model 209 | |
|---|---|---|---|---|
| BA32.20-P-1001-04C | Nut, connecting rod to torsion strut | NM | 40 | 40 |
| BA32.20-P-1005-04C | Bolt, connecting rod to wheel carrier | NM | 40 | 40 |
- Unscrew bolt of link rod (78) to wheel carrier.
- Unscrew bolt of torsion bar to link rod (78).
- Remove link rod (78) from the support points on the torsion bar and wheel carrier.
- Install in reverse sequence.