LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> SLK280 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Steering -- Testing & Repair -- 203 Chassis) >> Testing & Repair >> Removing and installing rubber mounts on rack-and-pinion steering mounting - AR46.20-P-0600-02I

Removing and installing rubber mounts on rack-and-pinion steering mounting - AR46.20-P-0600-02I

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1002-06A Lubricant A 000 989 01 60

    Remove 

  1. Press out divided rubber mount (21a, 21b) using a suitable tool.
    Fig 1: Pressing Out Divided Rubber Mount
    G04737154

    2. Install 

  2. Rub the circumference of the divided rubber mounts (21a, 21b) with liquid lubricant (Naphtolen H).
  3. Hammer in divided rubber mounts (21a, 21b) as far as possible using a rubber hammer.
  4. Draw in divided rubber mounts (21a, 21b) completely using bolt and wing nut.
    Fig 2: Installing Divided Rubber Mount
    G04737155
scientia non olet · About LEMON Manuals