LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> SLK280 Standard >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft - 171 Chassis >> Testing & Repair >> Remove/install propeller shaft - AR41.10-P-0050V >> Connecting rear propeller shaft to rear axle center assembly - AR41.10-P-0050-04V

Connecting rear propeller shaft to rear axle center assembly - AR41.10-P-0050-04V

PROPELLER SHAFT

Number Designation Model 171
BA41.10-P-1002-01A Self-locking nut, flexible coupling to rear propeller shaft or rear axle center assembly. M10 Nm 40
M12 Nm 60
  1. Mount rear propeller shaft on rear axle center assembly

    IMPORTANT Replace self-locking nuts (26).

    Fig 1: Identifying Rear Propeller Shaft To Rear Axle Center Assembly Bolt (Models 211/215/230 Without Vibration Damper)
    G05027557Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals