Passenger-side front door control module, purpose - GF72.29-P-4106-03P

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

Purpose

The front passenger door control module (N69/2) senses the window position of the passenger door and stores this information on the passenger compartment bus (CAN B).

The push-button control module reads in the signal of the passenger door window position via the CAN B bus to obtain a better control quality when the window is open.

Purpose, convenience locking, recirculated air

Pressing the recirculated air button for longer than 1.5 s activates the convenience locking function.

The right front door control module stores the momentary position of the window and closes it automatically when open.

After completing the convenience locking function the window is moved back to the stored position when the recirculated air button ) is pressed again for longer than 1.5 s.