Remove and install injection valves - AR07.03-P-6522Q
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 271.940 in MODEL 203.042 /242 /742, 209.342 /442
ENGINE 271.946 in MODEL 203.046 /246 /746
ENGINE 271.948 in MODEL 203.040 /240 /740
ENGINE 271.921 in MODEL 203.730
ENGINE 271.955 in MODEL 209.341 /441
Fig 1: Identifying Electrical Connector, Fuel Distributor, Anti-Twist Lock And Fuel Injection Valves - Engine 271
| Remove/Install | |||
|---|---|---|---|
| 1 | Open engine hood | Model 203 | AR88.40-P-1000P |
| Model 209 | AR88.40-P-1000Q | ||
| 2 | Disconnect the electrical connectors (1) at the fuel injection valves (Y62) | ||
| 3 | Remove fuel distributor (2) together with the fuel injectors (Y62) | AR07.03-P-1450Q | |
| 4 | Pull out anti-twist locks (3) at the fuel injectors (Y62) | ||
| 5 | Remove fuel injectors (Y62) | ||
| Lubricant | *BR00.45-Z-1002-06A | ||
| 6 | Install in the reverse order |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1002-06A | Lubricant | A 000 989 01 60 |