LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> SLK280 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Electrical System - Engine -- 203 Chassis) >> Maintenance >> Replace connector on ignition coils - AP15.10-P-1580-01P

Replace connector on ignition coils - AP15.10-P-1580-01P

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach connector (1) from housing (2) of ignition coil on cylinder 1 to cylinder 4 (T1/1 to T1/4).
  2. Move connector (1) on housing (2) until the starting position is reached.

    IMPORTANT The starting position is reached if the chamfer (3) on housing (2) starts to become visible and dimension (a) is achieved.

    Dimensions: 

    Fig 1: Identifying Connector Of Ignition Coils Dimension
    G04734128
scientia non olet · About LEMON Manuals