Pull out slide rail bolts at cylinder head - AR01.30-P-5800-04GS

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Extractor (116 589 20 33 00)

Fig 2: Identifying Threaded Studs (116 589 01 34 00)

Fig 3: Identifying Extractor (605 589 00 33 00)

Remove the slide rail bolts and the threaded studs with the impact extractor.
1. 1.1 Screw threaded insert (03) into the slide rail bolts (11) and remove the slide rail bolts (11) using the impact extractor (02) .
  
  Fig 4: Identifying Threaded Insert, Slide Rail Bolts & Impact Extractor
Remove the slide rail bolts with the extractor.
1. 1.2 Screw the extractor (04) into the slide rail bolts, turn the hexagon and pull out the slide rail bolts.
  
  Fig 5: Identifying Slide Rail Bolts With Extractor