Destination guidance in digitized map area, function with code 525 and 527 - GF82.61-P-4000SK

MODEL 171.4 with CODE (525) MB Audio 50 APS radio 

MODEL 171.4 with CODE (527) COMAND APS with single DVD drive (with navigation) 

For trips within the digitized map area, the following information is available to the user:

• The current route and position of the vehicle on a digital map (graphically depicted)
• Route list
• Distance from the destination and estimated time of arrival
• Direction recommendation
• Arrow indicating the driving direction
• Name of the road currently being traveled along
• Name of the next road into which the vehicle should turn
• Distance from the next junction (specified in units of length or as a bar graph)

The compass direction North, South, East and West is specified by graphical representation and voice output. The compass direction is displayed only in the case of numbered roads. No data and display of the compass direction is given in the case of roads designated by name (e.g. within towns).

For destination guidance, 3 illustration modes are possible:

• Map
• Map and symbol presentation of the turn-off points
• Symbol presentation (system of navigation symbols)

The scale of the map can be changed in stages. In addition to this a selection can be made as to whether the map is to be aligned in the direction of travel (Head-Up) or towards the North (North-up).

The DVD type (with the latest fine geometry) is automatically detected and the graphic displayed in a second optimized set of line thicknesses. Actual destination guidance is significantly supported via voice output.