Electronic mail (e-mail), function - GF82.70-P-2015SK

Model 171.4 up to 31.5.05 with CODE (386) Preinstallation for telephone "Portable CTEL", UPCI system

Model 171.4 up to 31.5.05 with CODE (388) Telephone "Portable CTEL", UPCI system

Model 171.4 up to 31.5.05 with CODE (494) USA version

The deadline for the electronic mail (e-mail) function cannot be exactly limited to 31.05.05. The e-mail function will be omitted as it is phased into production.

Function requirements:

The portable CTEL (A34/6) must be inserted into the UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15).
The portable CTEL (A34/6) and the radio (A2), with code (523) MB Audio 20 radio, the radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio, or the COMAND operating, display and control unit (A40/3), with code (527) COMAND APS using single DVD drive (with navigation) or with code (530) COMAND APS USA (with navigation system) are activated.
The Personal Identification Number (PIN) is entered
The portable CTEL (A34/6) is registered in the cellular mobile telephone network.
The provider settings for the Post Office Protocol 3 (POP3) server (for receiving e-mails) and for the Simple Mail Transfer Protocol (SMTP) server (for sending e-mails) have been made.

A POP3 server saves all incoming e-mails in an intermediate memory and does not transfer them until the user calls them up. If the automatic delete function is active, the intermediate memory for e-mails is not used.

Display location

The e-mails can be read as listed in the following:

On the display of the portable CTEL (A34/6)
On the display of the radio (A2), with code (523)MB Audio 20 radio, the radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio, or the COMAND operating, display and control unit (A40/3), with code (527) COMAND APS with single DVD drive (with navigation) or with code (530) COMAND APS USA (with navigation system)
In the upper multifunction display (A1p13) of the instrument cluster (A1)

Creating

The e-mails can be written and sent exclusively via the keypad of the radio (A2), with code (523) MB Audio 20 radio, the radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio, or the COMAND operating, display and control unit (A40/3), with code (527) COMAND APS using single DVD drive (with navigation) or with code (530) COMAND APS USA (with navigation system). It is only possible to write texts, in other words adding attachments (e.g., pictures, WORD documents, EXCEL tables) such as with a PC is not possible.

Functions

The following e-mail functions are available:

Receive, write, and send e-mails
Save, forward, and reply to e-mails
Write new e-mails, send them or save them as a draft
List all received e-mails sorted by the date they were received (different list representation according to the attributes for "read", "not read" and "protected" e-mails)
E-mails received can be deleted automatically and manually; secured ("protected") e-mails can only be deleted manually
Maximum message length < 600 byte
Maximum number of stored e-mails: 50
20 predefined sentences
An e-mail can be sent directly ("TO") and as a copy ("CC")
Manual entry of the e-mail address by selecting it from a list or automatically from the address book
Manual e-mail inquiry on server possible
Message when new e-mails have been received on the POP3 server
Logs:
SMTP, POP3, Transmission Control Protocol/Internet Protocol (TCP/IP)

The TCP ensures that the data are transmitted without error between the sender and the receiver, while the IP packs the data in so-called datagrams, which contain, in addition to the actual useful data, control data such as the protocol version, the datagram size, the control total, the source and the target address.

Rod antenna, location/purpose	GF82.62-P-4115SK
Compensator, location/task	GF82.70-P-3109SK
UPCI Portable CTEL Holder (Universal Portable CTEL Interface), location/task	GF82.70-P-5000SK
Universal Portable CTEL Interface (UPCI [UHI]) control unit, location/task	GF82.70-P-5100SK
Telephone/portable CTEL/STH radio remote control antenna splitter, location/task	GF82.70-P-5200SK