Remove and install bracket for portable CTEL telephone - AR82.70-P-8918R
MODEL 230.467 /474 /475 /476 up to 14.1.04 with CODE (852) CTEL pre-installation assembly at dome with CODE (854) MB portable CTEL
Fig 1: Identifying Portable CTEL Telephone Bracket Components (CTEL Pre-installation Assembly At Dome)
| Remove/install | |||
|---|---|---|---|
| 1 | Remove portable CTEL (A34/6) from bracket for portable CTEL (1) | ||
| 2 | Open stowage shell (2) and unscrew bolts (3) | ||
| 3 | Take out coin holder (4) | ||
| 4 | Take retaining plate (5) with bracket for portable CTEL (1) up and out of stowage shell (2) until electrical connector (6) is accessible | ||
| 5 | Unplug electrical connector (6) | ||
| 6 | Take antenna line (7), portable CTEL antenna line (9), and portable CTEL supply line (8) up and out of the catches (arrow) | ||
| 7 | Disconnect antenna line (7) and portable CTEL antenna line (9) from bolted antenna connection | ||
| 8 | Remove bracket for portable CTEL (1) from retaining plate (5) | ||
| 9 | Install in the reverse order | ||
| 10 | Perform function check |