LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> SL600 >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust Manifolds, Emission Control - 230 Chassis >> Testing & Repair >> Remove/install the oxygen sensor - AR14.00-P-5303R (SL500, SL55 AMG)

Remove/install the oxygen sensor - AR14.00-P-5303R (SL500, SL55 AMG)

ENGINE 113, 112 in MODEL 230 

Fig 1: Identifying Left O2 Sensor Upstream Of TWC And Right O2 Sensor Upstream Of TWC
G05068061Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Left O2 Sensor Downstream Of TWC And Right O2 Sensor Downstream Of TWC
G05068062Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Connector For Left/Right O2 Sensor Upstream/Downstream TWC
G05068063Courtesy of MERCEDES-BENZ USA
Fig. item etc. Work instructions    
IMPORTANT Remove engine compartment paneling IMPORTANT Only rear part. AR61.20-P-1105R
G3/3x1, G3/4x1 Connector for O2 left and right sensor upstream TWC    
G3/5x1, G3/6x1 Connector for O2 left and right sensor downstream TWC    
G3/3, G3/4 Left/right O2 sensor upstream of TWC IMPORTANTInstallation:  Coat thread of O2 sensors with heat-resistant lubricant. *BR00.45-Z-1005-06A 
TORQUE SPECIFICATION     *BA14.00-P-1001-01A 
SPECIAL TOOL     Fig 4
G3/5, G3/6 Left/right O2 sensor downstream of TWC IMPORTANTInstallation:  Coat thread of O2 sensors with heat-resistant lubricant. *BR00.45-Z-1005-06A 
TORQUE SPECIFICATION     *BA14.00-P-1001-01A 
SPECIAL TOOL     Fig 4
O2 SENSOR

Number Designation Engines 112.910/911/912/913/914/915/916/920/921/922/923/940/941/942/943/944/945/946/947/949/953/955/960/961/970/972/973/975 Engines 113.940/941/942/943/944/945/946/948/960/961/962/963/964/965/966/967/968/980/981/982/984/986/992/993/995
BA14.00-P-1001-01A O2 sensor on exhaust pipe/ exhaust manifold Nm 45 55
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1005-06A Paste A 000 989 76 51
Fig 4: Identifying Ring Wrench Socket (000 589 71 03 00)
G05068064Courtesy of MERCEDES-BENZ USA