LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> SL600 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes -- Testing & Repair -- 230 Chassis >> Testing & Repair >> Remove/install front axle brake caliper - AR42.10-P-0070 >> Remove/install front axle brake caliper - AR42.10-P-0070RA

Remove/install front axle brake caliper - AR42.10-P-0070RA

MODEL 230.472 /474 /476 /477 /479 

MODEL 211.076 /077 /276 /277 

Fig 1: Identifying Front Axle Brake Caliper Components
G04983983Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install    
DANGER Risk of injury  caused by body parts being jammed or crushed. Risk of injury  to skin and eyes caused by brake fluid spraying out at high pressure when working on the SBC brake system Deactivate SBC brake system using STAR DIAGNOSIS. AS42.46-Z-0001-01A
NOTES Notes on self-locking nuts and bolts   AH00.00-N-0001-01A
1 Deactivate SBC brake system using STAR DIAGNOSIS. Vehicles with Sensotronic Brake Control (SBC)  
    IMPORTANT The following steps should be run through in STAR DIAGNOSIS:  
    Select menu item "SBC-Sensotronic Brake Control"/"Deactivate 'SBC' system".  
    Then process all the individual steps from top to bottom.  
    STAR DIAGNOSIS diagnostic system,, see GOTIS  
    http://gotis.aftersales.daimlerchrysler.com  
2 Remove brake hose (51) Model 211 AR42.10-P-0013T
    Model 230 AR42.10-P-0013R 
3 Remove brake pads   AR42.10-P-1600RA 
4 Detach brake pad contact sensor connector (S10/1x1, S10/2x1) from fixed brake caliper (31a) Model 211:  
    TORQUE SPECIFICATION Bolt, brake pad contact sensor to brake caliper *BA42.10-P-1003-10H 
    Model 230:  
    TORQUE SPECIFICATION Bolt, brake pad contact sensor to brake caliper *BA42.10-P-1003-10B 
5 Unscrew bolts (35) and remove fixed caliper (31a) NOTES Under no circumstances loosen bolts (1) of radial bolted connection, otherwise brake system malfunctions occur.  
    Model 211  
    TORQUE SPECIFICATION Self-locking bolt, brake caliper to steering knuckle *BA42.10-P-1001-10H 
    Model 230  
    TORQUE SPECIFICATION Self-locking bolt, brake caliper to steering knuckle *BA42.10-P-1001-10B 
6 Install in the reverse order    
7.1 Bleed brake system with STAR DIAGNOSIS Vehicles with Sensotronic Brake Control (SBC) AR42.10-P-0012R 
    IMPORTANT When performing the bleeding operation always observe the instructions in the document "Bleeding brake system using STAR DIAGNOSIS".  
    IMPORTANT The following steps should be run through in STAR DIAGNOSIS:  
    Select menu item "Initial startup after repair"/"Exchanging brake calipers".  
    Then process all the individual steps from top to bottom.  
    STAR DIAGNOSIS diagnostic system,, see GOTIS  
    http://gotis.aftersales.daimlerchrysler.com  
7.2 Bleed brake system Vehicles with Adaptive Brake (ABR) AR42.10-P-0010T
FRONT AXLE BRAKE CALIPER

Number Designation Model 211.076/077/083/090/276/277/283/290, Model 211.084/087/089/092/284/287/289/292 with code 950, 951, 952
BA42.10-P-1001-10H Self-locking bolt, brake caliper to steering knuckle Nm 180
BA42.10-P-1003-10H Bolt, brake pad contact sensor to brake caliper Nm 8
FRONT AXLE BRAKE CALIPER

Number Designation Model 230.472/474/476/477/479, Model 230.471 without code 494
BA42.10-P-1001-10B Self-locking bolt, brake caliper to steering knuckle Nm 180
BA42.10-P-1003-10B Bolt, brake pad contact sensor to brake caliper Nm 8