Remove/install trunk lid paneling - AR68.30-P-8150R

MODEL 230.4 except CODE (P99) "AMG Black Series" special model 

Fig 1: Identifying Trunk Lid Paneling Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury  caused by moving parts that can pinch, crush or, in extreme cases even sever  extremities.	No parts of the body or limbs should be within the operating range of the mechanism when components are in motion.	AS00.00-Z-0009-01A
1	Completely open Vario roof
2	Remove cover (2) from trunk lid (3)	Installation:  Replace damaged expansion clips.
3	Remove closing wedges (4) from trunk lid (3)		*BA88.50-P-1015-01A
4	Remove expansion clips (5)	Installation:  Replace damaged expansion clips (5).
5	Unclip paneling (1) from trunk lid (3) starting at outer clips (6) (arrows) and remove.	Position mounting wedge directly to corresponding clip (6) to unclip, to prevent damaging paneling (1). Installation:  Replace damaged clips (6).
			Figure
6	Install in the reverse order
7	Check trunk lid adjustment (3), correct if necessary	Vehicles up to vehicle ident. end no. 063909	AR88.50-P-5200R
		Vehicles as of vehicle ident. end no. 063910	AR88.50-P-5200RA

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA