Remove/install mirror lens - AR88.70-P-9020RA

MODEL 230.4## ## as of 064521 

except CODE (803) Model year 2003 

Fig 1: Identifying Mirror Lens Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
	Risk of injury.  Skin, eye and respiratory system irritation may occur through contact or inhalation of substances contained in the mirror lens.	Wear protective gloves and safety glasses.	AS60.00-Z-0008-01R
1	Switch off ignition and remove transmitter key from EIS control unit	On vehicles with code (889) Keyless Go, press Keyless Go start/stop button repeatedly until ignition is switched off. Remove Keyless Go transmitter card or transmitter key from vehicle and store beyond reach of transmitter (min. 2 m).
2	Unclip mirror lens (1) from mirror adjustment drive (2).	Carefully unclip mirror lens (1) to prevent breakage. Installation:  Ensure that all catch hooks (3) are arrested on mirror adjustment drive (2).
3	Disconnect electrical connectors and remove mirror lens (1)
4	Install in the reverse order