Remove/install wiper linkage - AR82.30-P-7600R
MODEL 230.4
| Removing | |||
|---|---|---|---|
| Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism | Always remove ignition key when working on windshield wiper mechanism. | AS82.30-Z-0001-01A | |
| 1 | Remove wiper system | AR82.30-P-6400R | |
| 2 | Remove nut (1) from wiper motor shaft | ||
| 3 | Detach wiper linkage (2) from wiper motor shaft | ||
| 4 | Unclip plug (3) from wiper linkage (2) | ||
| 5 | Remove wiper motor (M6/1) from wiper linkage (2) | ||
| Install | |||
| 6 | Move wiper motor (M6/1) to parking position | AR82.30-P-6800-01E | |
| 7 | Attach wiper motor (M6/1) to wiper linkage (2) | ||
| 8 | Clip in plug (3) on wiper linkage (2) | ||
| 9 | Place wiper linkage (2) onto wiper motor shaft | ||
| 10 | Screw nut (1) onto wiper motor shaft | ||
| 11 | Install wiper system | AR82.30-P-6400R |