Release guide sleeves on Hardy couplings - AR41.10-P-0050-09I

Drift for loosening fitted sleeves in flexible couplings.

WF58.50-P-4110-01A

Propeller shaft installed 

Models 215, 220, 230 without vibration damper at rear 

1. Loosen the fit sleeves of the flexible couplings using the drift (shop-made tool) on the three or four arm flange of the transmission or rear axle center assembly.
   Fig 1: Loosening Fit Sleeves Of Flexible Couplings (Models 215, 220, 230 Without Vibration Damper)

   Courtesy of MERCEDES-BENZ USA

   Model 220.028/128 with vibration damper at rear 

   Fig 2: Loosening Fit Sleeves Of Flexible Couplings (Model 220.028/128 With Vibration Damper)

   Courtesy of MERCEDES-BENZ USA

   Propeller shaft removed 

2. Loosen the fit sleeves of the flexible couplings using the drift (shop-made tool) on the three or four arm flange of the transmission or rear axle center assembly.
   Fig 3: Loosening Fit Sleeves Of Flexible Couplings

   Courtesy of MERCEDES-BENZ USA